Chariot Carriers Merci Installation Manual Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
– 29 –
58-EN57-EN
2
Accessory parts
egasUepahSytQeman traP
Installation Manual 1 This manual
Hand this directly to the customer.
(For other languages that do not appear in this Installation Manual,
please refer to the enclosed CD-R.)
CD-ROM 1 Installation Manual
Drain nipple 1
Waterproof rubber cap 2
3
Installation of new refrigerant air
conditioner
CAUTION
New refrigerant air conditioner installation
This air conditioner adopts the new HFC refrigerant (R410A) which does not destroy ozone layer.
R410A refrigerant is apt to be affected by impurities such as water, oxidizing membrane, and oils because the working
pressure of R410A refrigerant is approx. 1.6 times as that of refrigerant R22. Accompanied with the adoption of the new
refrigerant, the refrigerant oil has also been changed. Therefore, during installation w
ork, be sure that water, dust,
former refrigerant, or refrigerant oil does not enter the new type refrigerant R410A air conditioner circuit.
To prevent mixing of refrigerant or refrigerant oil, the sizes of connecting sections of charging port on main unit and
installation tools are different from those of the conventional refrigerant units. Accordingly, special tools are required for
the new refrigerant (R410A) units. For connecting pipes, use new and clean piping materials with high pressure fittings
m
ade for R410A only, so that water and/or dust does not enter.
Required tools / equipment and precautions for use
Prepare the tools and equipment listed in the following table before starting the installation work.
Newly prepared tools and equipment must be used exclusively.
Legend
: Prepared newly (Use for R410A only. Do not use for refrigerant R22 or R407C etc..)
: Conventional tools / equipment are available
tnempiuqe / sloot esu ot woHesUtnempiuqe / slooT
Gauge manifold
Vacuuming / charging
refrigerant and operation check
Prepared newly for R410A only
ylno A014R rof ylwen deraperP esoh gnigrahC
Charging cylinder Can not be used Unusable (Use the refrigerant charging measure instead.)
Gas leak detector Gas leak check Prepared newly
Vacuum pump Vacuum drying Unusable
Vacuum pump with backflow
prevention function
Vacuum drying R22
.detsujda era snoisn
emid fi elbasU sepip fo gninihcam eralFloot eralF
22R sepip gnidneBredneB
Refrigerant recovery equipment Refrigerant recovery For R410A only
Torque wrench Tightening flare nuts Exclusive for Ø12.7 mm and Ø15.9 mm
22R sep
ip gnittuCrettuc epiP
Welding machine and nitrogen
cylinder
22R sepip gnidleW
Refrigerant charging measure Charging refrigerant R22
1115150101_EN.indd 291115150101_EN.indd 29 8/24/13 9:40 AM8/24/13 9:40 AM
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Comments to this Manuals

No comments